Arts & Crafts Living Room Furniture
Browse through our furniture collections, occasional tables, and stands.
-
QUALITY FEATURES & CARE
AJ’s Furniture appreciates your patronage and it is our desire to produce beautiful solid wood furniture that will stand the test of time and be enjoyed by generations to come. Starting with quality hardwoods, our frames feature the long lasting durability of mortise and tenon construction and attention to detail. Wood’s natural beauty and uniqueness is evident in each piece of furniture we craft. It is also wood’s natural tendency to adapt to climatic and seasonal changes as found in your home. Most hardwoods have an open-grain character and even after finishing with today’s state-of-the-art finishes, wood will expand and contract as the wood grain adjusts to fluctuations in humidity levels. These seasonal effects may be evidenced by joints or grain that may open and close slightly over time, this occurrence is natural and to be expected. To properly care for your solid wood furniture, it is best to maintain a constant relative humidity in your home. A humidity level in the range of 30-45% is desired to properly maintain wood furniture. It is advisable to avoid placing furniture in an area where the sun will shine directly on it. Also, it is wise to keep furniture away from direct sources of heating and cooling. Note that ultraviolet light from the sun and florescent fixtures can cause chemical changes in wood and/or finish. Ask your dealer to recommend finish-friendly cleaners and polishes. With proper care you’ll enjoy your new furniture for many years to come.
CONSTRUCTION
Quality is intentional (we say that a lot, because it couldn't be more true). Furniture is only as durable as it is built to be. At AJ's Furniture, we aim for a product that lasts longer than just your lifetime. That's why we use age-old techniques that are proven to withstand the test of time.
- Mortise and tenon
- Doweling
- Mitering
- Dovetails
- Tongue in groove
- Frames glued and screwed
- Floating construction where drawer bottoms are not glued, but instead move freely as humidity changes.
With AJ's Furniture, you don't have to question your furniture purchase. There's no disposable furniture here. Just long-lasting, superior construction and design - the way it should be.
-
MADE IN AMERICA
AJ’s Furniture is proud to source, design, and build our products right here in Topeka, Indiana. No overseas factories or questionable employees here.
Just 100% Made in the U.S.A.
-
ACCESSORIES & OPTIONS
At AJ’s Furniture we work hard to bring you features and options that will increase the functionality, comfort, and overall value of your furniture. Here are a few of those options...
-
- Arm Pads
-
- Power Options
-
- Pillows
-
- Coil Springs
-
- Battery Pack
-
- Power Motor
-
AJ'S FURNITURE WARRANTIES
Our consumer protection is our promise to you, the original purchaser, that each piece of AJ’s Furniture products will be free from manufacturing defects for its useful life, provided the furniture is used in a residential application.
FRAMES AND SPRINGS:
AJ’s Furniture warrants to you, the original retail purchaser, lifetime protection against manufacturing defects of frames and springs.
RECLINER MECHANISMS: (250lb load rating)
AJ’s Furniture warrants to you the original purchaser, a limited three (3) year warranty for residential use only. In the event a mechanism is determined by AJ’s Furniture to be defective withinthe warranty period, AJ’s Furniture will, at its option, repair or replace the mechanism. In no event shall AJ’s Furniture be responsible for any disassembly, installation, or labor charges outside of our manufacturing facility. In addition, AJ’s Furniture shall not be responsible for any shipping or packaging charges, except during the first year of this warranty.
GLIDER BEARINGS: (250lb load rating)
AJ’s Furniture warrants to you the original retail purchaser a two (2) year warranty. If found defective, AJ’s Furniture will replace the defective bearing or bearings. In no event shall AJ’s Furniture be responsible for any disassembly, installation or other charges outside of our manufacturing facility.
SEAT CUSHIONS:
We fabricate our standard seating with (Qualux Ultra 2.5lb density) polyurethane foam, which is considered the highest quality foam that is available to the upholstered furniture industry. AJ’s Furniture warrants to you the original retail purchaser, a limited lifetime warranty on our Qualux Ultra foam cores against manufacturing defects. Even though we use a high performing polyurethane foam, some flattening or loss of resiliency will occur as a result of normal use and aging. This is not covered under the warranty. Cushion materials conform to the shape of the user and is not considered to be a manufacturing defect. Cushion softness is significantly affected by the type of fabric or leather that surrounds it. Proper maintenance and seat cushion rotation where applicable will provide longer life and greater durability. Cushions suspected to be defective must be returned to the builder for industry testing. If it is determined that the cores were not properly cared for or were under extreme abuse, would void the warranty. If found defective, AJ’s Furniture will replace at no charge. Shipping and handling charges will apply to cushion cores replaced after two (2) years.
BACK CUSHIONS:
Most back cushions are constructed with (P1.5lb density) foam cores. These will be covered under the same guidelines as our seat cushion warranty policy..